decon Adventus, User Manual

Page: 12 / 18

Sida 12/18
Mechanical settings
Adventus
User manual
To customize Adventus
1. Measure the height from ground up to underneath the front tube of the wheelchair´s
footrest. Now set the angle postion (D) and wheelposition (G) according to the table below.
INFO!
Using the settings in the table below normaly results in lifting the front castors of the
wheelchair 30-40mm from the ground.
INFO!
The settings in the table below can vary between different wheelchair models and
manufacturers. The table shows a wheelchair where the footrest sits in an angle of
6-7degrees in relation to the ground.
Height footrest
[mm]
0-30 30-50 50-70 70-90 90-100 100-
Angle position (D)
[D0, D1]
D0 D0 D0 D0 D1 D1
Wheel position (G)
[G1, G2, G3, G4]
G1 G2 G3 G4 G3 G4
D0
D1
G1
G2
G3
G4