decoflame Denver, User Manual

Page: 8 / 16

8 Copyright Decoflame ApS. 8
DO NOT!
install the Denver Basic in
a wall construction, which is open
above and below fireplace. The
warm air will cause turbulences in-
side this hollow construction, which
will have a negative impact on the
flames.
DO!
install the Denver Baisc in an
open-wall construction, which is
closed above and below the fire-
place. Make sure to create a closed
cavity for the section below and
baseplate of the fire.
DO!
install the Denver Basic in a
massive wall (made of bricks, stone
or gas beton) using the wall cut-out
dimensions mentiones on the previ-
ous page.
There are various possibilities of installing this fireplace model: resting on top of the surrounding
surface, counter-sunk by means of using the two straps (see section 1).
5.2. wALL CONSTRUCTION
5.3. STEP-BY-STEP INSTALLATION PROCESS
®
1
2
3
4
6
5
Figure 5.3.1
See section 6.1.
YES YES NO