4 no. 12 x 1 ½’’ wood screws (no.4). You will need two people to move the fireplace (no.5) into
position, place it onto the hooks of the horizontal support (no.1) by matching up the hooks with
the square holes at the back of the unit.
Make sure that the fireplace is level.
Attach the 2 vertical supports (no.3) at the base of the fireplace (no.5) with 2 self-tapping
screws (no.6).
Place the burner support (no.7) into the fireplace opening.
Insert the reservoir (no.8) into the burner support (no.7).
Place the damper (no.9) onto the top of the bioethanol reservoir (no.8).
Using the designated holes install the window panes (no. 10)onto the front of the fireplace.
Ensure that they open and close correctly.
BURNER
Filling capacity: our model has a capacity of 1 litre and a tank of 15% flood (.150 litre). Which
gives 2.75 hours burning capacity when the damper is completely open. You can increase the
length to 5 hours by reducing the flames’ height by simply moving the damper forward. The
burner elements are removable and must be installed in the fireplace according to the instruc-
tions before ignition. The fuel must be poured into the burner reservoir.
If any spatters occur, make sure to clean them before lighting the fire.
COMBUSTIBLE FUEL
Only use
«
deco
fuel
»
liquid fuel.
CAUTION
: DO NOT USE PAPER, NEWSPAPERS, STRAW, KINDLING WOOD OR ANY OTHER
FLAMMABLE PRODUCT TO START THE FIRE.
The combustible fuel is a highly flammable product. It should be kept away from any heat
sources. Never place in direct sunlight. Do not store or carry fuel in a plastic or metal container
that is not designated for this purpose. Never store fuel in the same location as the fireplace.
Keep it in a safe place and keep it away from children.
In case of ingestion, inhalation and/or contact with eyes or skin, urgently contact the poison
control centre or consult a Doctor.
