Small
Gladetino
Mounting Options
Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change
product specifications without notice. Contact Deco for the latest product information.
2917 Vail Ave., Commerce, CA 90040 • (800)613-DECO (3326) • [email protected] www.getdeco.com
4
Wall Mount:
1. Loosen, but do not discard the retaining bolts on the underside of the luminaire-side wall mount.
2. Remove the wall-side bracket from the luminaire-side, and mount to the junction box using (4) screws (not included).
3. Ensure that the wall-side bracket is horizontal using the bubble level attached to the wall-side bracket.
4. Align the fixture-side wall-mount mounting holes with the (4) mounting holes on the rear side of the luminaire housing.
5. Place the wall mount against the housing, and route the Line, Neutral, and Ground wires through the small hole in the mount.
6. Fasten the arm to the housing using (4) included 1/4-20 bolts and the appropriate washers.
7. Connect the Line, Neutral, and Ground wires from the pole to the luminaire using the appropriate connectors.
8. Fit the fixture-side wall mount bracket over the wall-side bracket so that the luminaire is resting on the wall-side bracket.
9. Tighten the (2) retaining bolts to fasten the luminaire to the wall-side bracket.
Fig. 9
Fig. 10
Fig. 11
Dimensional Drawings
