DECKED.COM
|
#DECKEDUSA
|
@DECKEDUSA
MT8 | v.1.1 |
Page 16
S1
➡
CAB
INSTALL:
DECK HALVES
• Loosely place driver side deck panel on driver side stud, center vert and ammo can.
• Shift tailgate ammo can forward, rearward, L-R, as necessary to align with fully seated deck panel.
• Loosely assemble:
• Six bolts (without washers) through deck panel into center vert;
BAG
S1.
• Four bolts with nylon and rubber washers installed in order shown in
DETAIL A
through deck panel into
stud;
BAG
S1,
BAG
MS WASHERS.
• Eight bolts with nylon and rubber washers installed in order shown in
DETAIL A
through deck panel into
tailgate ammo can;
BAG
S1,
BAG
MS WASHERS.
• Tighten all
S1
bolts.
•
Securely tighten driver side C-Channel/ammo can nut and bolt.
• Repeat passenger side
(make sure you don't forget to securely tighten passenger side C-Channel/ammo can
nut and bolt).
NYLON WASHER
RUBBER WASHER
DETAIL A
NYLON WASHER
RUBBER WASHER
RECOMMENDED TORQUE:
Bolts in labeled bag S1 - 27 in-lb.
