Decibel Eleven Switch Doctor, Operation Manuals

Page: 21 / 27

Number). Enter the 3-digit value for this switch. This is the MIDI Value that will be sent
for this message when the switch is 'ON'. If it is being used as an ON/OFF function
switch, the value should typically be 127.
pdl
(Expression Pedal Continuous Controller)
Expression Pedal sets the global MIDI Channel for expression pedal data, and sets the
functions related to the handling of expression pedal data.
The MIDI Channel set here is the default global channel which can be used for
expression pedal data. Please note that when programming presets, the expression
pedal can be assigned to any MIDI Channel, allowing a single pedal to be used with
several different MIDI devices. However, if only one MIDI device is to receive pedal
data, it is recommended to set it's MIDI Channel here. All presets will default to this
global channel for expression pedal data.
Press the ► switch to view the current MIDI Channel. Use the + / - switches to edit the
current channel. Set to
OFF
to disable the expression pedal.
Press ► again to display the “ Transmit Pedal with Preset” setting (
tr
). This setting
determines whether the current pedal position will be transmitted when a preset is
activated. Use the + / - switches to set the value. When set to no (
n
), the pedal value
will not be transmitted when a preset is recalled, but will be transmitted once the pedal
is moved (value change). Set the transmit value to yes (
y
) to have the pedal's position
value transmitted when a preset is recalled, and also transmitted when the pedal is
moved.
Press the ► switch again to display the “ Pedal Type” ( ty ) . The expression pedal input
can be treated as either a continuous pedal or as an on/off switch. Use the + / -
switches to set the type. The default type is “pedal” (
p
). If a switch is used in the
expression pedal jack, then the type should be set to “switch” (
s
).
rCH
(MIDI Program Change Receive)
This is the setting for syncing to incoming MIDI Program Changes. When a MIDI
Program Change message is received on this channel, the Switch Doctor will respond
by recalling one of the 128 presets.
Press the ► switch to view the current MIDI Channel. Use the + / - switches to edit the
current channel. Set to
OFF
to disable expression pedal data.
REC
(MIDI Receive Echo)
This sets the MIDI output port echo behavior. Setting this value to NO will block
incoming MIDI messages from being re-transmitted to the MIDI output.
Press ► to display the current setting. Use the + / - switches to select
yes
or
nO
.
19