background image

Railmast

er

  

U

ser
’s M
anual

33

12. Warranty

TWO-YEAR RADAR WARRANTY

Decatur Electronics, Inc . guarantees the radar to be free from defects 
in workmanship and material and to operate within specifications 
for a period of two years . During this period, Decatur Electronics will 
repair or replace, at its option, any component (excluding batteries) 
found to be defective, without cost to the owner, providing you 
return the unit to a Decatur authorized warranty service center . 
 
The full warranty on parts and workmanship does not include 
normal wear and tear, crushing, dropping, fire, impact, immersion, 
over-tightening of screws or damage from attempted repair or 
modifications by unauthorized service agents .

For repairs, simply return the unit (transportation prepaid) directly 
to a Decatur authorized warranty service center . Refer to section 14 
Service Return Procedure .

TWO-YEAR WARRANTY EXCEPTION

If you purchased the unit under a special buying program, such as 
a state purchase contract, etc ., the above warranty may not apply . 
Please refer to the buying program contract for the appropriate 
warranty terms or contact Decatur Electronics .

If you are interested in an extended warranty contact your sales 
representative to discuss options .

Summary of Contents for Railmaster





































Reviews: