Railmast
er
™
U
ser
’s M
anual
11
Figure 3.6
Align the dots .
Next, plug the lighter plug into an active cigarette lighter receptacle
in the vehicle . The red led on the lighter plug should come on
showing that power is being applied to the Railmaster™ . With
the Railmaster™ turned off, it will take approximately 2 hours to
fully charge the batteries . Turning the Railmaster™ on with the
cord plugged in will stop the charge cycle allowing the gun to be
operated from the power cord . Batteries do not charge when the gun
is turned on .
3.7 Charge Status Indicator (LED)
The status of the charge can be determined by the Charge Status
Indicator LED located on the bottom of the handle (See figure 3 .7) .
The table below defines the status .
Fast blinking green light = checking battery condition
Medium blinking green light = charging battery
Solid green light = charged
Solid red light = charging error