Decatur Electronics Genesis II Select, User Manual & Installation Manual

Page: 10 / 72

G
enesis II S
elec
t
™
U
ser
’s
& Installa
tion Ma
nual
16/September/2015
10
1. Quick Start
Use the following instructions to quick start your Genesis II Select™:
1. With all cables, antennas and the hand remote attached, plug
the cigar plug of the radar into a powered 12VDC cigarette
lighter receptacle in the patrol motor vehicle.
2. Press the PWR button on the hand-held remote to power up the
radar unit. The radar will run through a brief self-test.
3. Press the ANT FRONT or REAR button to select the antenna from
which you want the radar to transmit. Press the same ANT button
when you wish to place the radar back into standby mode.
4. Press and release the MODE button to quickly toggle between
Moving Mode Opposite Direction and Moving Mode Same
Direction. Press and hold the MODE button for two seconds to
activate Stationary Mode.
5. Press and hold the FAST button to select Faster Mode when you
want to track the next strongest target going faster than the
strongest.
6. If you are in the Moving Mode Same Direction setting and are
using non-directional antennas and want to track a target that
is traveling slower than the patrol motor vehicle, press and
release the FAST button for Slower Mode. (Directional antennas
automatically select the correct setting for you.)
7. To lock on a target speed, press the LOCK button. The target
speed will transfer to the LOCKED window. The radar will
continue to process speeds and display them in the TARGET
window.
8. To clear a locked speed, press the LOCK button when an antenna
is transmitting and no target is present.
t 5IFPOMZGVODUJPOUIBUDBOCFDPNQMFUFEXJUIPVUMPTJOH
the locked speed is activating the test function.