Decatur Electronics GENESIS-II DIRECTIONAL, User And Installation Manual

Page: 40 / 90

GENESIS-II DIRECTIONAL ™ USER’S AND INSTALLATION MANUAL
40
Rev. 02/05
Patrol Speed Lock, Recall, and Blanking
This feature comes standard with the Genesis II
Directional and will enable the patrol officer to lock a
target speed which will then become displayed in the
locked window, while remembering internally what the
patrol speed was at the time the speed was locked. The
Genesis II Directional will, as long as the antenna
remains activated, continue to track both the speed of
the target in the target window and the patrol vehicle
speed in the patrol window.
1. When the antenna is turned off by the operator, the
locked patrol speed will appear in the patrol
window. This locked patrol speed will be reflective
of the speed of the police platform at the time
initial target reading was locked.
2. To blank the patrol speed, press the OPTN
button. Then press the OPTN button again to
recall it.
3. To permanently remove the locked patrol speed,
reactivate the antenna by turning it on.
Test (TEST)
Pressing the
TEST
button starts an extensive self test of
the radar unit’s circuitry. During self test, the system
will not power down until the test is complete. If the self
test fails, the
SYS
message will appear in the
MODE
window. For more information on tests, see section 9
Field Tests.
Pressing and holding the test button activates the menu
feature. This feature allows the operator to adjust some
of the settings of the radar. See Appendix B for more
information.