DecaLED
®
Controller 3 Mini
95350246
Manual
Description
Read this manual carefully before using our DecaLED
®
Controller 3 Mini. The DecaLED
®
Controller 3 Mini provides
a control interface and power for DecaLED
®
24V products. A maximum of 6 channels (2x RGB channels) can
be controlled separately, only a maximum loading capacity of 3A(1A per individual channel) is allowed on a
single output and the maximum amount of the total load can not exceed 4A distributed over all 2 outputs.
Package contents
1 x DecaLED
®
Controller 3 Mini
1 x DecaLED
®
Control Remote (Infrared Remote Control)
1 x IR EYE sensor(External connected infrared receiver sensor)
1 x Connection cord for the power supply
1 x Manual
Carefully unpack the carton. Check the contents to ensure that all parts are present and have been received
in good condition. If any parts appear damaged or missing, notify the shipper immediately and retain packing
material for inspection. In the event that the fixture must be returned to the factory, it is important that the
fixture is returned in the original factory box and packaging.
Features
USITT Standard DMX-512(1990) multiplexed digital control.
A maximum of 6 channels (2x RGB channels) can be controlled separatelyseparately, only a maximum
loading capacity of 3A(1A per individual channel) is allowed on a single output and the maximum amount of
the total load can not exceed 4A distributed over all 2 outputs.
Available in DecaLED
®
Setup Tool Control Mode, Full DMX Control Mode, Stand Alone Mode(Manual)
and IR Control Mode.
In DecaLED
®
Setup Tool Control Mode, available in Slave Control mode(DMX Mode) and Master mode.In
DMX Mode, allows to configure different load output modes as needed, consisting of RGB mode, Color
mode, Color &Brightness mode and Single mode. In Master Mode, available in Manual Mode and Auto
Mode,allows to select 1~10 patterns plus a sequence of 10 patterns with chase speed & fade time.
In Full DMX Control Mode, allows to set up DMX starting address.
In Stand Alone(Manual) Mode, built-in 1~8 patterns selection with chase speed & fade time is available by
configuring the dip switch.
In IR Control Mode, allows to set work modes and relative parameters with LED Remote control operation. Built-
in IR and external connected IR EYE sensor are optional. R.G.B. Color intensity can be adjustable separately.
And 1~10 patterns plus a sequence of 10 patterns selection with chase speed & fade time is available.
Improvements and specifications in the design of the unit and the manual are subject to change without any
prior written notice.
User Instructions
DecaLED Controller 3 Mini
for 24V
Part No.:24-004-2392-00
Version:1.0
Product Code:95350246
www.decaled.com
for 24V
Product code: 95350246
0
Dip Switches
1
Setup tool
SETUP TOOL
1 = ON
0= OFF
11
IR
1 = ON
0= OFF
12
0
IR OFF
1
IR ON
on
1 2 3 4 5 6 7 8 9 10
RS
ON
DMX Address (Slave)
(Dip Switches 10 = on)
Start
CH#
Start
CH#
Switches On
Switches On
1
2
3
4
5
6
7
8
9
10
1
2
1,2
3
1,3
2,3
1,2,3
4
1,4
2,4
1,2,4
3,4
1,3,4
2,3,4
1,2,3,4
:
:
:
:
1,2,3,4,5,6,7,8,9
11
12
13
14
15
:
:
:
:
511
000
100
010
110
001
101
011
111
Fade Time
Speed
Program
0%
:
:
:
:
:
:
100%
000
100
010
110
001
101
011
111
0.1S
0.2S
0.5S
1S
5S
10S
20S
30S
000
100
010
110
001
101
011
111
1
2
3
4
5
6
7
Auto
1 2 3 4 5 6 7 8 9 10
RS
ON
Stand Alone
(Dip Switches 10 = off)
on
1 2 3
on
4 5 6
on
7 8 9
on
Controller 3 Mini
