06
• Restart the unit and repeat the steps of 4-5 at least 3 times.
• Then turning the steam knob to position to brew until no descaler is left.
• Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-5 for 3 times (it is not necessary to
wait for 15 minutes in step of 5), then brewing until no water is left in the tank.
• Repeat the step of 8 at least 3 times to make sure the piping is cleanly.
TROUBLE SHOOTING
Symptom
Cause
Corrections
Carafe leakage water or water leaks out
from lid of carafe
The carafe is not located properly
The water level in the tank should be
within the scale of MIN and MAX.
The level of water in the tank exceeds the
scale of MAX.
The metal parts in the tank have rust.
The descaler is not recommended type. It
may corrode the metal parts in the tank.
Use the descaler recommended by
manufacturer.
Water leaks from the bottom of coffee
maker.
There is much water in the drip tray.
Please clean the drip tray.
The coffee maker is malfunction.
Please contact with the authorized service
facility for repairing.
Water leaks out of outer side of filter.
There is some coffee powder on filter
edge.
Get rid of them.
Summary of Contents for KUCF007W
Page 1: ...KUCF007W ESPRESSO MAKER ...
