04
7. After desired coffee has obtained, you should turn steam
knob to position, the indicator go out and the coffee
maker stops working, your coffee is ready now. Then remove
the carafe and turn the steam control knob to position
release the residual steam in the tank.
Warning: Do not leave the coffee maker unattended
during making the coffee, as you need operate manually
sometimes!
8. Before removing steel mesh or opening the tank cover, make
sure the pressure in the tank shall be released. The method
is turn the steam knob to the position firstly, the steam in
the tank will eject from the frothing device. After pressure has
released, and wait for the steel mesh cooling down, you can
remove the steel mesh or open the tank cover.
9. After finishing making the coffee, you can take the funnel out
through turn clockwise, and then pour the coffee residue out
with the steel mesh pressed by press bar. Let them cool down
completely, then rinse under running water. (When assemble
the steel mesh again, you shall turn over the press bar to the
original position)
FROTHING MILK/ MAKE CAPPUCCINO
You get a cup of cappuccino when you top up a cup of espresso
with frothing milk.
Method:
1. Prepare espresso first with container big enough according
to the part “make espresso coffee”.
2. Fill a jug with desired amount of milk for each cappuccino
to be prepared, you are recommended to use whole milk at
refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommend the
diameter is not less than 70±5mm, and bear in mind that
the milk increases in volume, make sure the height of jug is
enough.
3. Turn the steam knob to the position, the indicator will
light up.
4. Insert the frothing device into the milk about two
centimeters, after about 2 minutes, the steam will come out
from the frothing device. Froth milk in the way moving vessel
round from up to down.
Note: Please don’t fill too much water (should be≤150ml),
otherwise the steam amount will be little, and the water
content in frothing milk will be too much.
5. When the required purpose is reached, you can turn the
steam control knob to position stop frothing. Then remove
the jug and turn the steam control knob to position release
the residual steam in the tank.
Note:
•
Clean steam outlet with wet sponge immediately after
Summary of Contents for KUCF007W
Page 1: ...KUCF007W ESPRESSO MAKER ...
