07
PRODUCT INSTALLATION
1. unpack the machine and stretch the power cord.
2. Take out the support pole, (as shown in picture), pull out the
Pole 3, screw it clockwise into Pole 4, then pull out the pole
2, screw it clockwise into pole3, the last pull out the pole 1,
screw it clockwise into pole 2.
3.Put the pole into the hole at the top of main body accordingly
(showed as pic 2).Put the hook at the top of support pole
(showed as pic 4).The put the iron brush on the hook(showed
as pic 5).
