Red Bull Racing RB7: Step by Step
™
1
MODERN TECHNOLOGY AND A RANGE OF TUNING OPTIONS MAKE
THE RED BULL RACING RB7 RACING CAR A FASCINATING MODEL FOR
BEGINNERS AND EXPERIENCED MODELLERS ALIKE.
YOUR RED BULL
RACING RB7 AT
A GLANCE
Fitting detailed display bodywork makes the Red Bull Racing RB7 model
a very realistic representation of Sebastian Vettel’s car. An additional
racing body is supplied for use on the track, so there is no need to risk
damaging the display body when the car is in action.
Based on Kyosho’s proven technology, your 1:7-scale
model Red Bull Racing RB7 delivers exciting motor
racing action. With its rear-mounted engine powering
the rear wheels – as on the full-sized original Red Bull
Racing RB7 – its nimble handling and rapid acceleration
promise an entertaining, authentic driving experience.
EASY ASSEMBLY
Assembling the model is simple and straightforward,
even for inexperienced modellers. Simple step-by-step
instructions take you through the assembly process
in easy stages. Each component is illustrated for easy
identification, and its installation is clearly explained.
And with each pack, alongside the assembly guides,
introductory articles will provide a wealth of in-depth
background information about RC modelling.
THE ENGINE AND TRANSMISSION
This little car is a thoroughbred circuit racer, and with
its 3.5cc nitro motor, it has enough power to challenge
any of its competitors on the track. The Red Bull Racing
RB7 is driven by the powerful Kyosho GX21 engine,
which delivers 1.8 horsepower at the crank. Being a
short-stroke design (with 16.6 x 16mm bore and stroke),
it is free-revving, with an even spread of torque. The
engine delivers great acceleration from standstill, as
