Dea 602AN, Operating Instructions And Warnings

Page: 3 / 20

7
OLI/N
Hydraulic automation for swing gates
Operating instructions and warnings
Index
1
Warnings Summary
7
6
Start-up
10
2 Product Description
9
6.1 Installation Test
10
3
Technical data
9
6.2 Unlocking and manual operation
11
4 Installation and Assembly
9
7 Maintenance
11
5
Electrical Connections
10
8
Product Disposal
12
1 WARNINGS SUMMARY
WARNING! I
MPORTANT SAFETY INSTRUCTIONS
. C
AREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUC
-
TIONS THAT ACCOMPANY THE PRODUCT SINCE INCORRECT INSTALLATION COULD CAUSE HARM TO PEOPLE
,
ANIMALS
OR THINGS
. W
ARNINGS AND INSTRUCTIONS PROVIDE IMPORTANT INFORMATION REGARDING SAFETY
,
INSTALLATION
,
USE AND MAINTENANCE
. K
EEP THE INSTRUCTIONS TOGETHER THE TECHNICAL DOCUMENTATION AND FOR FUTURE
REFERENCE
.
WARNING The device may be used by children of less than 8 years of age, people with
reduced physical, mental or sensory impairment, or generally anyone without experience
or, in any case, the required experience provided the device is used under surveillance or
that users have received proper training on safe use of the device and are aware of the
dangers related to its use.
WARNING Do not allow children to play with the device, the fi xed commands or the ra-
dio controls of the system.
WARNING Product use in abnormal conditions not foreseen by the manufacturer may
generate hazardous situations; meet the conditions indicated in these instructions.
WARNING DEA System reminds all users that the selection, positioning and installa-
tion of all materials and devices which make up the complete automation system, must
comply with the European Directives 2006/42/CE (Machinery Directive), 2014/30/UE
(electromagnetic compatibility), 2014/35/UE (low voltage electrical equipment). In order
to ensure a suitable level of safety, besides complying with local regulations, it is advis-
able to comply also with the above mentioned Directives in all extra European countries.
WARNING Under no circumstances use the device in an explosive atmosphere or in
areas that may be corrosive or could damage product parts. Check that the temperatures
at the installation site are suitable and comply with the temperatures declared on the
product label.
WARNING When working with the “dead man” switch, make sure that there are no pe-
ople in the area where the automatism is being used.
WARNING Check that there is a switch or an omni polar magneto-thermal circuit bre-
aker that enables complete disconnection in case of over voltage category III conditions
installed upstream from the power system.