12
De Rigo Refrigeration s.r.l.
Replacing shall lighting
Before starting any operation entailing light bulb replacement, make sure power is disconnected and/
or open the power isolator. Also remember that any technical assistance and extraordinary mainte-
nance must only be carried out by qualified technical personnel.
IMPORTANT: replace the light bulb with a part of the same type and power.
To replace the light bulb:
1. Disconnect power to the counter;
2. Release the light bulb, both on the right and left, slightly pressing downwards Fig. 3a;
3. Remove the light bulb from the protective tube, taking off the plastic end piece, making sure it
does not come out suddenly Fig. 3b-3c (except for LED lamps);
4. Reinsert the new light bulb in the protection;
5. Restore the new light bulb in its seat;
6. Power the counter, closing the power isolator
.
Fig. 3a
Fig. 3b
Fig. 3c
