37
The finished piece
Here is the finished
assembly. Your Sky
Rider Drone is taking
shape! Check your
results with this
picture to make sure
everything is in its
correct place. Store the
pieces safely, wrapping
them in a cloth to
prevent them getting
scratched.
Useful comparison
This is a view from the
inside of the chassis.
You can see an M3 x
12mm screw already
fixed on the left. The
screw to its right has
not been tightened,
so the nut is still
protruding.
Tighten the screws
Tighten the M3 x 12mm
screws using the 2.5mm
Allen key from Stage
14. Tighten the screws
clockwise. Do this for all
four M3 x 12mm screws
on the left side.
8
7
9
Assembly Guide
Summary of Contents for Sky Rider Drone
Page 1: ...Pack 04 TM www model space com ...
Page 11: ......
