7
2.2 Installation
REMOVE POWER TO THE PC WHEN REMOVING OR INSERTING THE CARD INTO
THE PC.
From a subdirectory on the floppy disk, copy all the files for the Windows operating system on the PC
into a convenient subdirectory on the hard disk, such as:
C:\NHi15504pci
Also copy the files PCI504.exe, PCIhlp.txt, 15504man.pdf and Man156XX.pdf into this directory.
Turn off PC and install the NHi-15504PCI card.
Turn on PC.
Windows Plug'n'Play should detect the new hardware. Do NOT let Windows look for a driver. Direct
Windows to the subdirectory where the driver resides, C\NHi15504pci in this example.
NOTE:
For windows NT which is not Plug'n'Play, follow the installation instructions in the .txt file which came
with the NT driver files.
2.3 Hardwired RT Address Jumpers
The Terminal can be given a unique Remote Terminal(RT) hardwire address via jumper selection.
The Factory default configuration for a terminal with an RT address of 1 and odd parity is shown below:
1
0
JP1 (Par)
•
•
•
JP2 (A4)
•
•
•
JP3 (A3)
•
•
•
JP5 (A2)
•
•
•
JP7 (A1)
•
•
•
JP10(A0)
•
•
•
Note
:
In the above illustration, position the PCI card with the component side up and the Bus connectors on
your left.
