S-Cutter
29
9.
Action to take when tip bolt is damaged
9-1.
If the tip bolt is damaged due to the carelessness, overload,
accumulation of fatigue, etc. as shown in the picture below, it is
easily removed through the counterclockwise rotation toward the edge
of damaged tip bolt by using a sharp material, such as a gimlet,
knife, etc., instead of hitting with a hammer or welding.
9-2.
Also, the damaged tip bolt might be removed by tightening the same
bolt (M4-20mm and above) at the back of the damaged tip bolt(same
hole).
9-3.
If the tip bolt is not removed with the methods above, please apply
for the after service, and we will send the tip bolt quickly if you
contact us when you don't have a tip bolt.
Summary of Contents for S-CM4_M
Page 30: ...S CM4_M S CM4_OD...
