S-Cutter
25
2. Standard parts
Same as S-CM4_M (refer to explanation of No.2)
3. How to adjust the processing width
3-1.
Loosen all 4 processing width adjustment bolts by using T-hex wrench.
3-2.
Move the guide into the desired width by looking at the processing
width adjustment marking, and tighten the processing width
adjustment bolts(4ea) firmly. Distance that a guide of S-CM4_OD can
be moved for the width adjustment is from minimum 18mm to
maximum 48mm.
Processing width adjusting bolt
48mm
18mm
Processing width adjusting bolt
Hexagon wrench
Summary of Contents for S-CM4_M
Page 30: ...S CM4_M S CM4_OD...
