![DCS RDU User Manual Download Page 43](http://html.mh-extra.com/html/dcs/rdu/rdu_user-manual_517198043.webp)
4
1
US
CA
Care and cleaning
When a
CLEAN
cycle has finished
The halo around the temperature knob will go out
.
You need to:
1
Turn the oven mode knob clockwise to
OFF
.
I
n a few seconds, its white halo will go out, indicating that the door is now unlocked
.
Important!
The oven will still be at cooking temperatures when the door unlocks. Take care.
2
Turn the temperature knob clockwise to
OFF
.
3
Wait for the oven to cool down completely.
4
Remove any gray ash from the oven with a small brush or damp cloth
.
5
W
ipe out the oven with a clean, damp cloth and dry with a clean, lint
-
free cloth
.
6
Replace the side racks and shelves
.
See sections ‘Removing and replacing the side racks’ and
‘Positioning the shelves’ for instructions
.
To cancel a
CLEAN
cycle
1
Turn the oven mode knob clockwise to
OFF
.
I
f the oven is too hot for the door to be unlocked straight away, the halo will continue to glow
white
.
O
nce the oven has cooled to a cooking temperature, the door will automatically unlock
and the halo will go out
.
Important!
Do not turn the power supply to the range off at the circuit breaker panel. The cooling fan is needed to cool
the oven. Disconnecting the range from the power supply while the oven is too hot may damage the oven
and its surrounding cabinetry.
2
Turn the temperature knob clockwise to
OFF
.
3
After the door has unlocked, wait for the oven to cool down completely.
4
I
f necessary, wipe up any food soiling inside the oven
.
W
e do not recommend cancelling a CL
EA
N cycle and then immediately starting one again
.