3
Keypad Display Symbols
1
Clock Digits 1, 2
– These two 7 segment clock digits indicate the hour digits when the lo al clock is active, and identify
the zone when the OPEN or ALARM icons are active. These two digits scroll one zone per second from the lowest zone
number to the highest when scrolling through zones.
2
: (Colon)
– This icon is the hours/minutes divider and will flash once a second when the local clock is active.
3
Clock Digits 3, 4
– These two 7 segment displays are the minute digits when the local clock is active.
4
1 to 8
– These numbers identify troubles when
[
,
][2]
is pressed.
5
Memory
– Indicates that there are alarms in memory.
6
Bypass
– Indicates that there are zones automatically or manua y bypassed.
7
Program
– indicates that the system is in Installer’s Programming, or the keypad is busy.
8
Away
– Indicates that the panel is armed in the Aw y Mode. It will turn on at the beginning of the Exit Delay.
9
Fire
– Indicates that there are fire alarms in memo y.
10
Stay
– Indicates that the panel is armed in t e Stay Mode. It will turn on at the beginning of the Exit Delay.
11
Chime
– This icon turns on when the Chime
unction key is pressed to enable Door Chime on the system. It will turn off
when the chime function key is pressed again to disable Door Chime.
12
AM, PM
– This icon indicates tha th local clock is displaying 12 Hr. time. These icons will not be on if the system is pro-
grammed for 24 Hr. time.
13
ALARM
– This icon is used w th clock digits 1 and 2 to indicate zones in alarm on the system. When a zone is in alarm,
the ALARM icon will turn on, and 7 segment displays 1 and 2 will scroll through the zones in alarm.
14
OPEN
– This icon is used with clock digits 1 and 2 to indicate violated zones (not alarm) on the system. When zones are
opened, the OPEN icon will turn on, and 7 segment displays 1 and 2 will scroll through the violated zones.
15
AC
– Indicates that AC is present at the main panel.
16
System Trouble
– Indicates that a system trouble is active.
17
Night
– Indicates that the panel is armed in the Night Mode.
18
System -
Indicates one or more of the following
:
Memory
– Indicates that there are alarms in memory.
Bypass
– Indicates that there are zones automatically or manually bypassed.
System Trouble
– This icon is displayed when a system trouble is active.
19
Ready Light (green)
– If the Ready light is on, the system is ready for arming.
20
Armed Light (red)
– If the Armed light is on, the system has been armed successfully.
9
8
10
7
11
20
5
9
6
17
14
7
11
10
LCD5501 Fixed Message
LCD5501 ICON
LCD5511
LED5511
PK5508/PK5516
PK5501
http://www.ealarm.com.my
