17
each side
13/16” - 2 “
(20-51 mm)
10c
LOWER PRODUCT INTO CUTOUT, ATTACH MOUNTING BRACKETS & SECURE
1
With the help of an assistant lower the chiller into the cutout, ensuring the drain outlet is accessible.
2
Locate the mounting holes on each side of the beverage chiller and screw in the provided mounting clamps at the appropriate level for the countertop.
3
Secure the beverage chiller into place by tightening the clamping screws against the countertop on two sides.
Each mounting clamp comes with 4 positions.
Screw the clamps into the most appropriate
position using the screws provided.
Drain outlet
It is recommended that the Beverage Chiller be connected to the permanent waste
drainage system.
Important!
Connection to the existing drainage system must be carried out by certified plumber and in
accordance with local codes and regulations.
The sink drain connection is 1-1/2” NPS male thread.
11c
CONNECT TO THE DRAINAGE SYSTEM
