- 21 -
3.1.3
WDS Settings
Click "System Settings"
>>"WDS Settings" on the left menu to view the WDS
current status of the AP. If you need to bridge this AP with other ones, you can click
the "Edit" at the bottom of the page to enter the WDS setting page, as shown
below:
If you want to manually enter the information of the target wireless network or
the target wireless network is a hidden network, you can directly enter the
corresponding wireless network information and save it.
If you want to connect it through the scanning method, you can first select the
radio frequency band to be bridged on this page, click the "Scan" to start scanning,
select the target BSSID, and then select "Connect" for WDS connection, as shown
below:
