- 60 -
Appendix A FAQS
Question 1: How to restore the factory settings if the user forgets the device
password?
Take WL8200-XW2 as an example. In the power-on state, long press the Reset
button for 5 seconds and release the reset button, the AP will restore the factory
settings and restart. After restart, the user name and password are reset to the
initial user name and password.
After restoring the factory settings, all settings will be deleted and restored to fit
mode.
There may be differences between different products. For details, please refer to
the product specifications.
Question 2: Can't open the device webpage using the default address of
192.168.1.10?
The address 192.168.1.10 is the default static address of the device. It may
happen that the device webpage cannot be opened through this address in the
following situations:
1. When the AP is in fit mode or fat bridge mode
(1) The device may have obtained another IP address through the POE port.
Please access it through the current address of the AP.
(2) The IP address of the device may be modified;
2. When the AP is in fat routing mode:
(1) The device used to access the AP is located on the WAN side of the AP.
