DCLCD DCL20, User Manual

Page: 18 / 36

DCLCD DCL20 Page18
& * + $ - & $ , & * + $ - & $ , & * + $ - & $ , & * + $ - & $ ,
1. Make sure the power of DCL20 LCD MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor , please
hook up your old monitor first and make sure your refresh rate
is set to 60 Hz frequency before using the DCL20 LCD
MONITOR. You can find the refresh rate information and
change it by RIGHT CLICKING on the desktop with nothing
selected. After you have right clicked, select the ROPERTIES
option. Click on the SETTINGS tab. Click on the ADVANCED
button. Click on the MONITOR tab. In that tab, change the
refresh rate to 60Hz and click on APPLY. After the refresh rate
changed, please shut down the computer and monitor.
3. Obtain the VGA cable and connect to the VGA connection on
your PC. Connect the other end of the cable to your DCL20
LCD MONITOR.
4. Turn on the power of both the DCL20 LCD MONITOR and the
PC.
Please Note :
The PC’s clearest picture is produced
under 1680x1050 at 60Hz.