D
IGITAL
C
ONTROL
I
NCORPORATED
8
DigiTrak MFCB Operator’s Manual
Connecting to the Cable Transmitter
The cable transmitter must be grounded before it is connected to the cable box. Without a
proper ground, no signal or data will be sent to the remote display. The ground point on the
cable transmitter is the metal end section of the tube where the wire exits.
FC Cable Transmitter
When the cable transmitter is properly fitted into a housing, the ground connection occurs
automatically because the housing is grounded through the drill. When testing the cable
transmitter outside of a housing, use a piece of wire to ground the transmitter to the negative
terminal of the battery.
Once the cable transmitter is properly grounded in a housing, connect it to the cable box by
loosening the knob on the power post, inserting the stripped wire end in the hole in the post,
and gently retightening the knob.
Connecting Transmitter Cable to Cable Box
Ground
Transmitter wire
