ASSEMBLING THE MEAT GRINDER HOUSING
1. Attach the Grinder Housing(J)by pushing it into the matching slots on the Basic Unit Housing
(A). See notes in”Main Unit Housing Backplate section for assembly
2.Slide the Auger(M)through the Grinder Housing into the shaft portal in the Basic Unit Housing
3.Fit the Grinder Blade(N)in place on the front of the Auger shaft Face the Grinder Blade with the
sharp edges facing toward the Grinder Plate(O) Fit the Grinder Plate to the tip of the Auger shaft
and secure in place by setting the Grinder Plate tabs into the slots on the front of the Grinder
Housing.
4. Secure everything in place by screwing the Extrusion Cap (P)on the threads on front of the
Grinder Housing
5. Remove the black storage tray from the Basic Unit Housing and replace it with Food Pulp
Collector when grinding meat
6. Use the Pusher(L)to feed meat into the grinder.
MEAT GRINDER PARTS
A Basic Unit Housing
M Auger
J Grinder Housing
N Grinder Blade
K Chute/ray
O Grinder Plate
L Pusher
P Extrusion Cap
NOTE: All meat grinder parts are marked with
an”M”to identify which attachments are used for
meat grinding. The parts of each housing are also
color coded to help you identify which parts are
used with which housing.
USER MANUAL - MULTI-FUNCTION FOOD PROCESSOR - PM1800
