Show your current heart rate
，
average
，
and max heart rate during exercise
,
pulse range: 40
–
220
BPM
6.
AUTO OFF
Without any exercise signal or operation over 4 minutes
,
the computer will turn off automatically and
memorize the current data.
•
INSTALLATION
1. Fix the computer on the front place of exercise bike by screw
2 . Install the magnet and wireless sensor on the related place of the bike. Make sure the magnet is
align with the sensor's triangle icon" Þ-"
Step 1: drill the hole at the installation place (screw hole notice: the hole is tapping if the shell is metal,
the hole is screw directly if the shell is plastic).
Step 2: install the sensor bracket (you can install at different places, as there is no special requirement
for places).
Step 3: tighten the sensor on the base
Step 4: keep the distance between magnet and sensor less than 10 mm.
The installation steps of flying
wheel’s magnet and wireless sensor:
The belt pulley or crank’s magnet and wireless sensor installation (the installation of wireless sensor is
the same as flying wheel).
The distance between sensor and computer is no more than 2 meter.
•
OPERATION
1. CODE MATCHING
The computer 's transmitting and receiving are all using the coded 433M frequency. lt needs to finish
the code matching for first time usage, or either party change the batteries. Or else
,
the signal cannot
be transmitted and display the right data
