DC Athletics CANNIBAL I Manual Download Page 2

Before You Start 

Thank you for purchasing the DC Athletics Cannibal I Speed Bike! For your safety and benefit, read this 
manual carefully before using the machine. 

Prior to assembly, remove components from the box and verify that all the listed parts were supplied. 
Assembly instructions are described in the following steps and illustrations. 

 

IMPORTANT SAFETY NOTICE 

Note the following precautions before assembling or operating the machine. 

01.  Assemble the machine exactly as the descriptions in the instruction manual. 

02. Check all the screws, nuts and other connections before using the machine, 

only do exercising on the machine when it is in correct working way. Ensure 
that all users are adequately informed of all precautions. 

03. Set up the machine in a dry level place and leave it away from moisture and 

water; before beginning exercising, remove all objects within a radius of 2 
meters from the machine. 

04. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the 

machine in the area of assembly or exercise to avoid scratch, dirt and etc. 

05. Do not use aggressive cleaning articles to clean the machine, remove drops 

of sweat from the machine immediately after finishing exercising.  

06. Only use the supplied tools or suitable tools of your own to assemble the 

machine or repair any parts of machine, use only original spare parts for 
any necessary repairs. 

07. Your health can be affected by incorrect or excessive exercising. Before 

beginning this or any exercise program, consult your doctor. This is 
especially important for people over the age of 35 or those with pre-
existing health problems. 

08. This machine is intended for home use only, not suitable for therapeutic 

purpose. 

09. Wear appropriate clothes and athletic shoes when exercising. 

10. If you have a feeling of dizziness, sickness or other abnormal symptoms, 

please stop immediately and consult your doctor. 

11. The power of the machine increases with increasing the speed, and the 

reverse. The machine is equipped with adjustable knob that can adjust the 
resistance. 

12. The maximum user’s weight is 1

50 KGS. 

Summary of Contents for CANNIBAL I







Reviews: