In-Ear Monitor Application Guide
®
6
Quantum
dbx
The QUANTUM’s Wizard provides the easiest avenue for programming the unit. To access the
Wizard, press and hold the PROGRAM button.
Once in the Wizard mode, select the task you wish to perform. (The QUANTUM will automati-
cally choose the correct chain type for your task.) If you select Mastering or Mixing, the Wizard
will then ask you to select the type of music being played. After you have selected the music
type, select the desired type of EQ, gating, compression, and limiting (all of which are, of course,
influenced by the musical genre being played). For example, with the music type set to “Hard
Rock,” a “Light” compression setting will be heavier than a “Heavy” setting in the “Classical” mode.
If you select “Tracking,” you will be asked to setup channel one, channel two, or both (stereo).
If you are tracking two separate instruments in dual-mono, you can go through the Wizard twice
(setting up channel one the first time and channel two the second time). If at any time you want
to quit before completing the Wizard, press the PROGRAM button.
QUANTUM Program Set-Up
analog
input
analog
input
meter
TSE
meter
analog
input
control
digital
input
control
digital
input
analog
output
digital
input
meter
gain
reduction
meter
TYPE IV™
Conversion
digital
output
meter
digital
output
analog
output
meter
analog
output
control
DSP (Software - Based)
Operations
Bypass
Clone Bypass
(push and hold Bypass for 2 seconds)
D / A
Convertor
A /D
Convertor
Sample Rate
Converter
Dynamics
Processor
Dither
Fig 1.2
