background image

U.K. MAINS PLUG WARNING

A molded mains plug that has been cut off from the cord is unsafe.
Discard the mains plug at a suitable disposal facility.  NEVER UNDER ANY
CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAINS
PLUG INTO A 13 AMP POWER SOCKET.  
Do not use the mains plug with-
out the fuse cover in place.  Replacement fuse covers can be obtained
from your local retailer.  Replacement fuses are 13 amps and MUST be
ASTA approved to BS1362.

LITHIUM BATTERY

WARNING

CAUTION!

This product may contain a lithium battery.There is danger of
explosion if the battery is incorrectly replaced. Replace only
with an Eveready CR 2032 or equivalent. Make sure the bat-
tery is installed with the correct polarity. Discard used batter-
ies according to manufacturer’s instructions.

ADVARSEL!

Lithiumbatteri - Eksplosjonsfare.Ved utskifting benyttes kun
batteri som anbefalt av apparatfabrikanten. Brukt batteri
returneres apparatleverandøren.

ADVARSEL!

Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri av samme fabrikat og
type. Levér det brugte batteri tilbage til leverandøren.

VAROITUS!

Paristo voi räjähtää, jos se on virheellisesti asennettu.Vaihda
paristo ainoastaan laitevalmistajan suosittelemaan tyyppin.
Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

VARNING!

Explosionsfara vid felaktigt batteribyte. Använd samma batteri-
typ eller en ekvivalent typ som rekommenderas av apparattil-
lverkaren. Kassera använt batteri enligt fabrikantens instruk-
tion.

IMPORTANT SAFETY INSTRUCTIONS

ELECTROMAGNETIC

COMPATIBILITY 

This unit conforms to the Product

Specifications noted on the Declaration of

Conformity.  Operation is subject to the fol-

lowing two conditions:

• this device may not cause harmful inter-

ference, and 

• this device must accept any interference

received, including interference that may

cause undesired operation.  

Operation of this unit within significant electro-

magnetic fields should be avoided.

• use only shielded interconnecting cables.

Manufacturer’s Name:

dbx Professional Products

Manufacturer’s Address: 

8760 S. Sandy Parkway
Sandy, Utah 84070, USA

declares that the product:

Product name:

dbx  Mini Tube Pre

Note: Product name may be suffixed by the letters EU, JA.

Product option:all (requires Class II power adapter that 

conforms to the requirements of EN60065, EN60742, or

equivalent.)

conforms to the following Product Specifications:

Safety:

IEC60065 (1998)

EN 60065 (1993)

EMC:

EN 55013 (1990)

EN 55020 (1991)

Supplementary Information:

The product herewith complies with the
requirements of the Low Voltage
Directive 73/23/EEC and the EMC
Directive 89/336/EEC as amended by
Directive 93/68/EEC.

dbx Professional Products
Vice-President of Engineering
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
June 7, 2001

European Contact:  Your Local dbx Sales and Service
Office or 

Harman Music Group
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Phone:(801) 568-7660  fax:(801) 568-7662

DECLARATION OF

CONFORMITY

3

mini comp manual   8/16/01  1:48 PM  Page 3

Summary of Contents for Mini-Pre Vacuum Tube Microphone PreAmp













Reviews: