background image

Warranty

This warranty is valid only for the original purchaser and only in the United States. We warrant dbx
products against defects in materials or workmanship for a period of two years from the date of orig-
inal purchase for use, and agree to repair or, at our option, replace any defective item, except exter-
nal power transformers, without charge for either parts or labor.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack
of reasonable care, the affixing of an attachment not provided with the product, loss of parts, or con-
necting the product to any but the specified receptacles. This warranty is void unless service or repairs
are performed by an authorized service center. No responsibility is assumed for any special, inciden-
tal or consequential damages. However, the limitation of any right or remedy shall not be effective
where such is prohibited or restricted by law.

Simply take or ship your dbx product prepaid to our service department. Be sure to include your sales
slip as proof of purchase date. (We will not repair transit damage under the no-charge terms of this
warranty.) dbx will pay return shipping.

NOTE: No other warranty, written or oral is authorized for dbx products.

This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow the exclusion of limitations of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above exclusion and limitations
may not apply to you.

3

Summary of Contents for 566

















Reviews: