DBM ACE9600 Programmer'S Manual Download Page 34

Page: 34 / 100

dBm

Advanced Channel Emulator

ACE9600

Programmer’s Manual

Size of the entire binary data file in bytes

Notes:



The

Begin File Transfer

command is sent through the control port of

the instrument, and the acknowledgement or Nak comes through the control
port.

Sending Binary Download Data

Syntax:

[binary data]

Function:

Binary data segments are sent through the data port of the instrument.

Returns:

Nak:

Ack: File Transfer Next

Where:

Descriptive text describing cause of error

Notes:



The binary data is sent through the data port, and the acknowledgment or Nak
comes through the control port.



The binary data size for each segment is limited to 8192 bytes.

Ending the File Download

Syntax:

End File Transfer

Function:

Informs the instrument that downloading has ended normally.

Returns:

Nak:

Ack: File Transfer Ending

Where:

Descriptive text describing cause of error

Filename

Notes:



The

End File Transfer

command is sent through the control port of the

instrument, and the acknowledgement or Nak comes through the control port.



Once the acknowledgment is received, another file transfer may begin.

Aborting the File Download

Syntax:

Summary of Contents for ACE9600





































































































Search results

Summary of Contents for ACE9600

Reviews:

Related manuals for ACE9600

Brands by name

Popular brands

DBM ACE9600, Programmer'S Manual

Search results

Summary of Contents for ACE9600

Reviews:

Related manuals for ACE9600

Brands by name

Popular brands