DBM ACE9600 Programmer'S Manual Download Page 11

Page: 11 / 100

Advanced Channel Emulator

dBm

Programmer’s Manual

ACE9600

Sent command -

Open DataPort

Received command -

Ack: DataPort Opened

Notes:



Send this command to the control port before uploading a file, downloading
file or uploading capture data. After the command has been acknowledged,
open a socket to the data port and begin file or capture transfers.

Closing the Data Port

Syntax:

Close DataPort

Function:

Instructs the ACE to close the data port.

Returns:

Nak:

Ack: DataPort Closed

Where:

Descriptive text describing cause of error

Example:

Sent command -

Close DataPort

Received command -

Ack: DataPort Closed

Notes:



Send this command after finishing all file and capture transfers, as well as
before disconnecting from the control port.



If further file or capture transfers are needed, reopen the data port by sending
the "Open DataPort" command and opening a socket to the data port.

Mode Commands

The commands described in this section are related to obtaining or changing the mode
of the instrument.

Getting the Mode

Syntax:

Get Mode

Function:

Returns the current Mode of the instrument.

Returns:

Nak:

Summary of Contents for ACE9600





































































































Search results

Summary of Contents for ACE9600

Reviews:

Related manuals for ACE9600

Brands by name

Popular brands

DBM ACE9600, Programmer'S Manual

Search results

Summary of Contents for ACE9600

Reviews:

Related manuals for ACE9600

Brands by name

Popular brands