得伯乐科技有限公司
DBL Technology Limited
RoIP-302 User Manual
Web:
www.dbltek.com
Tel: +86 755 8829 0211
IX. Application Examples
Example 1:
Linking up two MOTO GM300 Radio terminals in peer-to-peer mode with two
RoIP302/RoIP302G. The network access method is ADSL.
Operating procedures:
i.
Connect the PTT Interface of the radio terminal (GM300) with the PTT Interface Cable as
shown in the diagram below. Connect the RJ-11 plug of the PTT Interface Cable to PTT1 port of
the RoIP302.
ii.
Connect the RoIP302 LAN port to an Ethernet port of the ADSL Router
iii.
Assign a fixed IP to the RoIP302 LAN port. This fixed IP must be in the same segment as
the LAN port of the ADSL Router.For example: if the LAN of the ADSL Router has an IP
192.168.1.1, then the LAN port RoIP302 could be set to 192.168.1.101.
iv.
Configure the DMZ mode of the ADSL Router to fixed IP assigned to the RoIP302 LAN port.
For
DMZ configuration, please refer to the User Manual of the Router.
v.
Login to the RoIP Webpage and program the Network Settings as shown below.
Please note that the DNS addresses should be programmed as provided by from your local ISP.
vi.
Next go to the PTT Setting page and set both PTT Input and Output to active low as
shown below.