manualshive.com logo in svg

DBL Technology ROIP302 Series, User Manual, Page: 16 / 32

Share
Download
DBL Technology ROIP302 Series User Manual Download Page 16

                 

 

得伯乐科技有限公司

                             

DBL Technology Limited                                                                                                         

RoIP-302 User Manual 

                                                                                                                                                                                                                       

Web: 

www.dbltek.com

 

Tel: +86 755 8829 0211 

 

a.

    Language  –  This  specifies  the  language  for  the  webpage  and  the  voice  prompts.Currently, 

only 

English and Simplified Chinese are supported.     

b. 

  Time Zone and Time Server – Time Zone is specified as GMT + or – a fixed value. RoIP 

acquires the standard GMT time from the Time Server specified. 

c.

    Auto Reboot – This option reboots the device automatically at the time specified. 

d.

    .DDNS – When the RoIP is installed in a network environment with dynamic IP and a SIP 

server is not used, customer can choose to use our free DDNS service or DDNS offered by other 
service  provider.Enable  this  option  to  connect  to  our  DDNS  service  as  shown  above.The  current 
settings are set to connect to our DDNS server (hk.ippcn.com) using port “39980” and the update 
time is 600 seconds.Please note that the DDNS Address cannot be set to other DDNS server; this 
setting only works with our own DDNS server. Once this service is used, the domain name for the 
RoIP is then <serial number>.com. The serial number is shown on the bottom label. 

e.

    Remote Control – This option allows a user to access the RoIP’s webpage directly from our 

remote control server. 

iv. Network 

Proper network environment is the key to insure the performance of the RoIP302. normal For 

best  performance,  it  is  recommended  to  connect  the  RoIP302  to  a  network  with  a  static  IP.  In 
general, this kind of network access offers higher bandwidth utilization. The next preferred network 
access method is ADSL / Cable modem with PPPoE dial up for dynamic IP allocation. The worst is 
the  sharing  private  network  via  a  router.The  performance  of  RoIP302  depends  greatly  on  the 
bandwidth  usage.In  this  case,  it  is  best  to  configure  the  router  to  DMZ  mode  to  the  IP  of  the 
RoIP302. 

In  order  to  get  network  access,  the  LAN  port  must  be  configured  according  to  the  network 

environment  to  be  connected.    There  are  3  access  methods  available  for  the  LAN  port 
configuration. 

a. 

  Static  IP  – This  mode applies to  both public and private  IP network environment.  In the 

LAN port configuration shown below, select “Static IP” and then fill in the parameters as provided 
by your network administrator.       

 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for ROIP302 Series

































Reviews:

No comments