Input *20# and initiate requests by Terminals device, doing this can control the
remote device. Remote control server is supported by service provider, default port
is 1920, logo terminals by SN. The address and password are the same.
As indicated in figure, fill 202.155.200.154, pick the phone and press *20#, then hear
a long tone, shows succeed. Open
http://202.155.200.154:8086
, and you will see the
connected Gateway model and serial number, click “serial number”, you can
configure it.
F) Tone Mode
It is dialing tone and ring back tone, and so on. You can choose different tone
according to different countries.
G) China Phone Code Matching
Can match all the China phone code and make sure the fastest dial time
H) Reboot Time
