7
2.2 Optional - Connect Drymatic Boost Bar Adaptors
Drymatic Boost Bar has been designed to work with a series of adaptors that allow you to target the heated airflow in to
areas that may otherwise be difficult to access such as Crawlspaces, Ceiling Voids, Cavity Walls and Tented Areas.
The Boost Bar is supported by the following adaptors:
4-Port Adaptor (4 x 100mm Connections)
This gives you the ability to split the heated airflow in to four separate channels. You can now heat four separate
areas at the same time. The connector accepts both PVC hoses and Lay Flat Ducting
12-Port Adaptor (12 x 38mm Connections)
This gives you the ability to split the heated airflow
in to 12 separate channels. You can now use these outlets to
heat up difficult to reach locations such as wall cavities, ceiling voids, kitchen cabinetry and subfloor areas.
90Deg Adaptor
This gives you the ability to angle the airflow downwards in to a crawlspace or subfloor area. Alternatively the
connect or can be rotated and the airflow can be angled upwards in to the ambient air, keeping the warm dry air
away from sensitive floorings materials etc.
Lay Flat Ducting can be attached to the outlet of this adaptor to take heated airflow up to ceiling level if required.
See overleaf for fitting instructions.
