© Copyright 2002 DB Industries, Inc.
User Instruction Manual
Tripod Anchorage Connectors
This manual is intended to meet the
Manufacturer's Instructions as required by
ANSI Z359.1 and ANSI A10.14, and
should be used as part of an employee
training program as required by OSHA.
The 8000000 and 8000010 Tripods
are Classified by Underwriters
Laboratories Inc. as to the 350 lb.
load capacity only.
WARNING:
This product is part of a personal fall arrest, work positioning,
personnel riding, material handling, or rescue and evacuation system. The
user must read and follow the manufacturer's instructions for each
component or part of the complete system. These instructions must be
provided to the user of this equipment. The user must read and understand
these instructions or have them explained to them before using this
equipment. Manufacturer's instructions must be followed for proper use and
maintenance of this product. Alterations or misuse of this product or failure to
follow instructions may result in serious injury or death.
IMPORTANT:
If you have any
questions on the use, care,
application, or suitability for
use of this safety equipment,
contact DBI/SALA immediately.
IMPORTANT:
Before using this
equipment, record the product
identification information found
on the ID label of the tripod on
the inspection and maintenance
log in section 9.0 of this
manual.
* If additional information on
this product is necessary,
supplemental instructions
will be included.
Summary of Contents for 8001717
