background image

1

© Copyright 2005, DB Industries, Inc.

User Instruction Manual Rescumatic® Emergency Escape

Device and Rescue Cradle

This manual is provided as the Manufacturer’s instructions, and should be used as

part of an employee training program as required by OSHA and CSA.

WARNING: This product is part of an emergency escape
system. The user must follow manufacturer’s instructions
for each part of this system. The user must read and
understand these instructions before using this equipment.
Manufacturer’s instructions must be followed for proper
use and maintenance of this equipment. Alterations or
misuse of this equipment, or failure to follow instructions,
may result in serious injury or death.

IMPORTANT: If you have questions on the use, care, or
suitability of this equipment for your application, contact
DBI/SALA.

IMPORTANT: Record the product identification information
from the ID label in the inspection and maintenance log in
section 9.0 of this manual.

DESCRIPTION

3300000 (SD-100): Rescumatic® Emergency Escape Device, includes two webbing body supports, one 2000106
carabiner, rope, styrene rope spool, and a vinyl dust cover.

9501722: Snatch Block; for angled descent. (Optional item, sold separately)

3610000: Rescue Cradle, this kit consists of a canvas cradle, a carabiner and a guide line. The cradle has one ring on
each side and a webbing tab tail which must all be attached together. (Optional item, sold separately)

1.0

APPLICATIONS

1.1

Purpose: The Rescumatic® Emergency Escape Device is used for automatic, controlled descent from overhead
cranes, towers, buildings or other heights. The system alternates from clockwise to counterclockwise from
descent to descent, thus allowing for multiple descents to occur. Rope lengths up to 1,000 ft (304.8m) (300 ft
[91.4m] in Canada) are available. The Snatch Block is used for angled descent when a vertical descent is
inappropriate due to fire, smoke, fumes, or other danger. See section 3.3 (C). The Rescue Cradle is used for a
rescue of an injured person. See section 3.4 (C).

IMPORTANT: The Rescumatic® Emergency Escape Device must not be used for fall protection. This equipment is
designed for EMERGENCY descent use only.

1.2

LIMITATIONS: Consider the following application limitations before using this equipment:

A. CAPACITY: The Rescumatic® is designed for use by persons with a combined weight (clothing, tools, ect.)

of 75 lbs. to 300 lbs (34kg to 136kg). (Rescue Cradle capacity is 350 lbs (159kg).)

Rescue Cradle

Rescumatic® Emergency

Escape Device

Snatch Block

Instructions for the following series products:

Detachable Roof Anchors

(See back page for specific model numbers.)

Summary of Contents for 3300000

















Reviews: