SmarTalk User Guide
Setting
Basics
15
Assigning Station Buttons
Speed dialing other stations is only possible if your
SmarTalk is connected to a group of other SmarTalks,
and each one is set up by the installer with station
numbering.
Station buttons can be linked to other stations.
Station buttons are the unlabeled, or hand-labeled
buttons to the right of the line buttons. When these
buttons are linked to other stations, you can also monitor
telephone use at those stations.
A station button has no primary link if there is no icon
above it in the display. It could have a secondary link. If
an icon is displayed above the button, there are one or
two links assigned. Only the primary link is monitored.
If the station buttons are hand-labeled, they may already
have station links assigned.
Please also see “Labeling a Button” on page 17.
Assigning a Station Link
To assign a primary station button to another station:
1. Hold down the button until you hear a beep and
Assignment...
is displayed.
2. Press
Select
.
A flashing dotted line is displayed with text above it.
If the text AND dotted line flash, the station is already
assigned, or not available for assignment.
3. Press until you find the station to assign to this button.
4. With the correct station displayed, press
Shift
,
Save
to
save your selection, then
Cancel
,
Cancel
.
To assign a secondary station button, press
Shift
before
you hold down the button. If you assign ONLY a
secondary button, nothing will display above the button.
