![DBA smartalk User Manual Download Page 15](http://html1.mh-extra.com/html/dba/smartalk/smartalk_user-manual_3951395015.webp)
SmarTalk User Guide
Setting
Basics
9
Setting Basics
Introduction
The basic settings of a SmarTalk are: time, date, and
station name.
These settings can be changed. However, if you change
the time and date on a SmarTalk that is in a group, your
changes will change every other SmarTalk in the group.
If you should happen to set the wrong date or time, this
will be corrected by a signal on the next incoming call
through your telephone company.
Changing Settings
SmarTalk comes from the factory with basic settings, and
sometimes with a few items in the Directory.
Set up a SmarTalk for a new user by changing the basic
settings for time, date, and station name.
Getting Out of Things
Press
Cancel
repeatedly to get out of something and
start again.
Using Setup Mode
Use setup mode to set and change the time, the date, the
station name, and the functions of buttons.
•
Press
Shift
, then
Setup
to put the SmarTalk into
setup mode.
•
Press
Cancel
to get out of setup mode.
Tip
Press
Cancel
repeatedly to return to the basic display.