You can start fast with...
Using the speakerphone
: press , then press number
buttons to enter the number and make a call without the
handset.
Face the SmarTalk and speak in a normal voice.
Press to end the call. To switch from speakerphone to
handset during a call, lift the handset.
Adjust volume
during a call by pressing either
–
or
+
.
Press M
to mute or ‘unmute’ your own voice.
Redialing
: press
Dial
twice.
Putting a call on hold
: press
Hold
. To get the call back,
press the
Line
button on which the call is held.
If SmarTalk
rings and you can’t answer
, you’ve
probably pressed a button. Press
Cancel
several times,
until nothing happens in the display. Then answer.
If SmarTalk asks for
Station Name Here
, ignore it until
you get to “Entering Station Name” on page 12.
BUT before anything else, you need
to know...
How the arrow buttons work
How Shift, primary, and secondary button functions work
How the Cancel button works
How the Select button works
How the Save button works
If you try to figure this out on your own, you’ll be here all
day. If you use the Guide it’ll take half an hour.
So read on...
