www.dbtechnologies.com
ES1002
cod. 420120265Q rev.1.1
Thank you for choosing a dBTechnologies Product!
The new ES1002 is a powerful and versatile active audio system. It can be easily set up and it comes with one
subwoofer (2 x 12” woofers) and one column top (8 x 4” mid-woofers, with Logarithmic Curved Column Array
technology). The powerful class-D DIGIPRO
®
G3 amplifier can handle up to 900 W RMS and the I/O section allows
connecting up to 2 inputs (1 XLR mono and 1 RCA stereo connections with independent volume controls). The user-
friendly control interface helps the user to tune precisely the system in different scenarios, thanks to 8 DSP presets.
Main cabling accessories are also included.
1) Unpacking
The packages in which the system is boxed are two
(see picture 1).
The first package contains:
-No. 1 subwoofer ES1002S SUB
, with 3 handles [
Y
] one
on the top and two on the sides) and one M20
threaded hole [
Z
] on the top for pole-mounting (see
picture 2).
-No. 1 telescopic pole
. It is composed of 2 screw-on
pieces, it has to be mounted on the top side of the
ES1002S ([
Z
] threaded hole) (picture 2).
-No. 1 audio cable
, with speak-on connectors, which
is 2.5 m (8.2 feet) long.
-No. 1 mains cable,
with VDE connector.
-No. 2 cable clips
-This quick-start and warranty documentation
-No. 1 100-120V~ 50-60Hz fuse
The second package contains:
-No. 1 column speaker
.
It has one 36 mm hole for pole-mounting [
A
] in the
bottom side and one [
B
] rear speak-on connector
(picture 3).
2) Mount the system
- Assemble the telescopic pole (screwing the two
pieces together), and screw it in the [
Z
] threaded hole
of subwoofer with right-handed movement.
- Insert the [
A
] hole of the speaker column in the
telescopic pole and adjust the final height (picture 4).
WARNING
The speaker is supplied with a mounted fuse for operation
within the 220-240V~ range. If you need to operate in the
110-120V~ voltage range:
1. Disconnect all connections, including the power supply.
2. Wait for 5 minutes.
3. Replace the fuse with the one provided in the package
for the 100-120V~ range
WARNING
- YOU MUST ANCHOR THE SYSTEM TO THE GROUND WITH
STRAPS AND SUITABLE MECHANICAL MEANS (NOT SUPPLIED).
- NEVER USE THE HANDLES TO SUSPEND THE SYSTEM!
