www.dbtechnologies.com
ES1002
cod. 420120265Q rev.1.1
3) I/O and Control panel
In the rear side of ES1002S SUB the user can find the
control panel and the mains section of the system
(pictures 5, 6):
1 - MIC/LINE INPUT (XLR or TRS connector)
2 – VOLUME MASTER CONTROL
3 – LINE/MIC SWITCH
4 – LINK OUTPUT (XLR connector)
5 – RCA STEREO INPUT (L, R)
6 – AUX VOLUME
7 – STATUS LED (Limiter, ON Signal)
8 – DSP PRESET ROTARY CONTROL
9 - TOP OUTPUT
10 – VDE MAINS INPUT (AUTO-RANGE)
11 – ON/OFF POWER SWITCH
12 – MAINS FUSE
4) ES1002 cabling
- Link the SPEAKER COLUMN connector [
B
] to the TOP
OUTPUT [
9
] of the ES1002S SUB, using the supplied
speak-on cable. Mount the two cable clips to the pole
to organize the cabling.
5) Setup, turn on and I/O settings
- Connect the desired inputs (with proper cables and
connectors), using [
1
] XLR and [
5
] RCA inputs.
- If needed, link the output [
4
] to the input of a second
system or to a stage monitor (as example), with a
proper cable (XLR connectors).
Choose the right DSP PRESET, using the rotary [
8
]:
FLAT -
Designed specifically where a flat response is
required. In this case the output signal is coherent to
the input one.
BASS BOOST –
Useful to improve the bass presence
BASS REDUCTION -
Designed for the use in room with
reverberation issues
PLAYBACK –
Preset suitable
to use music from MP3
players, CDs or other sources with emphasis on high
frequencies.
SPEECH -
Designed to enhance speech intelligibility.
This preset emphasizes middle and high frequencies.
LONG THROW –
The medium-high frequencies are
enhanced, to get the longest propagation of the sound.
HPF 80 Hz –
Apply
a high pass filter with 80 Hz cutoff
frequency (the subwoofer presence is partially
limited)
HPF 120 Hz -
Apply
a high pass filter with 120 Hz cutoff
frequency (the subwoofer presence is strongly
limited)
- Insert the VDE connector of the supplied mains cable
in MAINS INPUT [
10
], connect the plug to the power,
and turn on the POWER switch [
11
].
- The ON Signal LED start blinking, signaling the
presence of audio signal (when applied). Adjust the
volume controls [
2
], [
6
].
Check the complete user manual on
www.dbtechnologies.com
for further information about the system and available
accessories.
Scarica il manuale completo da
www.dbtechnologies.com
per
ogni ulteriore informazione sul sistema e sugli accessori
disponibili.
Für weitere Informationen und verfügbares Zubehör lesen sie
bitte
die
vollständige
Bedienungsanleitung
unter
www.dbtechnologies.com.
Vérifiez
le
manuel
de
l'utilisateur
complet
sur
www.dbtechnologies.com
pour
des
informations
complémentaires du système et des accessoires disponibles.
Compruebe
el
manual
de
usuario
completo
sobre
www.dbtechnologies.com
para la información adicional sobre el
sistema y accesorios disponibles.
WARNING
-USE ONLY ES1002 SUPPLIED CABLE.
-USE THE SUPPLIED SPEAKER COLUMN ONLY WITH
ES1002S SUBWOOFER
- MAKE SURE THAT THE SYSTEM IS SECURELY INSTALLED IN A
STABLE POSITION TO AVOID ANY INJURIES OR DAMAGES TO
PERSONS OR PROPERTIES.
