27
DVA KS10
Code 420120233 REV. 1.0
English
4. OUTPUTS MODE
Makes it possible to choose the type of
filter (LINK, XOVER).
INPUT AND CONTROL SECTION
7. WARNING LEDS
LED Limiter, Signal, Mute/Prot, Ready
In normal operation, Ready LED is steadily on, Signal LED starts blinking at the presence of the signal. For further
information please check the table on the next page.
5. “XOVER” SWITCH
This switch is used to select the crossover frequency (120 Hz, 90 Hz)
6. “SUBWOOFER SETUP” CONTROLS
Rotary “Delay” control to set the delay time in ms (e.g in an End-fire configuration), and a “Phase”
button for phase inversion (e.g. in a Cardioid configuration).
3. SUBWOOFER LEVEL
Rotary which controls the output level.
Set to 0 dB (mono or stereo )for
common applications.
8. SERVICE DATA
The type-B mini USB port must only be used to update the product firmware For further information, please refer
to the Web site http://www.dbtechnologies.com in section “
1. BALANCED INPUTS
There are 2 inputs (mono or stereo
configuration) for balanced cables with
XLR connectors.
2. BALANCED OUTPUTS
There are 2 outputs (mono or stereo
configuration) for balanced cables with
XLR connectors.
