3.5. Rear panel
3.5.1. ETH 5/MODE ETH 3
A fifth Ethernet port is provided on the rear panel which is intended
for the internal Ethernet wiring within a d&b Touring rack assembly.
Note: The ETH 5 port operates in the same port mode as
ETH 3 (Refer to
Þ
"Network switch modes and functions"
on page 11).
3.5.2. DIGITAL OUT 5 – 16
In addition, six digital output connectors are provided on the rear
panel to allow further AES channels to be used if more than four
AES channels are required.
3.6. Meta data
The DS10 sends meta data (Dante channel labels, cabling
information...) via the AES3 outputs alongside the digital audio
samples, using the AES3 User bits.
These meta data can be read out by the d&b four channel
amplifiers (Stream labels).
In addition, these meta data can also be displayed in R1 via the
d&b Remote network.
For more information, please refer to the respective amplifier
manuals and/or the R1 Help system.
d&b DS10 Manual 1.5 en
13
