10
ALIGN
MOUNTING
HOLES
SIDE
VIEW
FOR SCREWS
MOUN TING HOLE
DAYVA PREMIERE OUTDOOR HEATER
Step 6
Turn the hood upside down on your cardboard work surface. Place the emitter screen in
the center of the hood and align the mounting holes. From the outside, insert four screws.
From the inside, install one lock washer and one hex nut on each screw. Tighten securely.
Step 7
Turn the hood/emitter screen assembly over
and place it on the heater post. Make sure
all four of the mounting tabs are inside the
emitter screen. Line up holes in screen with
tabs.
Install four screws and tighten securely.
